Just picked up the new skull and crossbones bandana? Perfect! Now let's get you all set up with a perfect fold for a perfect fit.
1.) Place the bandana on a smooth, clean surface. It should be unfolded, with the printed side face down. You will need to give yourself enough room so that you can lay it out and fold it easily.
2.) Fold the bandana into a triangle. Take one corner and fold it across to the corner diagonally opposite it. Smooth the cloth so you have a nice triangle free from wrinkles.
- Form a crease along the folded edge you just made.
- If the bandana will still be too big for the dog you can make another fold. Match together the corners of the longest (just creased) edges together. Smooth the bandana flat once again and crease the folded edge.
3.) Tie the bandana on with a square knot. Place the bandana around the dog’s neck. Hold both ends of the bandana, one in each hand. Pass the right end over the left end and then back under the left. Pass the left end over the right end and back under the right.
- Tighten the knot by pulling on both ends until they don't move any further.
4.) Make sure the bandana is fitted correctly on your dog. You need to be able to easily fit two or more of your fingers under the bandana after you’ve tied the knot. If not, untie and retie until it fits properly.
5.) Adjust the placement of the bandana. Some people prefer the knot on top of the dog’s neck and some under and enjoy. There is no right way to style the bandana!
6.) Take your dog out for a stroll around the neighborhood so they can show off their new swag!